Fire Stopping

3M Fire Barrier Composite Sheet CS-195+

• Four-component intumescent system is ideal for firestopping larger penetrations such as cable trays and conduit
• Easy to install: cut, form and install using common trade tools for nearly any size
• Firestop tested for up to 4 hours in accordance with ASTM E 814 (UL 1479)
• Forms effective intermittent fire-break within horizontal and vertical cable tray runs
• Thermally conductive: allows unwanted heat build-up to escape, helping reduce derating issues
• Hard char material tightly seals penetrations against flame spread, smoke and toxic gases
• Re-enterable for new or retrofit installations

Available sizes: 36” x 36” and 28” x 52”

3M Fire Barrier Sealant CP 25WB+

• Firestop tested for through penetration applications up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
• Sealant is re-enterable and repairable
• Sag-resistant properties offer clean application as well as strong adhesion in both wall and floor applications
• Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
• Water-based and paintable sealant provides easy application and clean-up
• Sealant helps minimize sound transfer

3M Fire Barrier Water Tight Sealant 3000 WT

• Firestop tested up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S114
• Re-enterable and repairable fire barrier sealant
• High-solids formula produces limited shrinkage
• Offers excellent sealant and caulking properties
• Continuous seal remains pliable and allows for typical pipe movement
• Sealant helps minimize noise transfer

3M Fire Barrier Water Tight Sealant 1000 NS

• Firestop tested up to 3 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
• Non-slump, halogen-free formula provides strong adhesion
• Formulated as a re-enterable and repairable solution
• Fire resistance tested for construction joint (including curtain wall) systems in accordance with ASTM E 1966 (UL 2079), ASTM E 2307
• Exceptional weatherability for durability during construction
• Sealant is paintable with primer
• Excellent caulk rate and sealant can be applied with conventional caulking equipment
• Minimizes noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)

3M Fire Barrier Wrap Strips FS-195+

• Material is intumescent for thermal insulation (Intumescent material effectively firestops non-metallic penetrants)
• Re-enterable material saves time and money after installation
• Aluminum foil exterior makes for accurate, effective installation
• Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479)
• Easily installed – simply wrap, secure and seal

Available sizes: 2” x 24, 10pcs/case

3M Fire Barrier Restricting Collar RC-1

• Helps ensure secure installation of expandable firestop and proper closure during fire
• Bendable tabs let installers anchor penetrations to slabs quickly and permanently
• Durable 28-gauge steel protects firestop material
• Use in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS
• Convenient roll is easily cut to size

Available sizes: 2 in. x 25 ft /roll

3M Fire Barrier Mortar

• Ready-to-mix pumpable mortar is deal for firestopping large annular spaces and floors
• Contains no asbestos, MMMF or halogens
• Lightweight mortar designed to absorb heat, reducing chance of combustion on unexposed sides
• Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC-S115
• Polypropylene-fiber reinforced powder mixes with water for self-leveling or non-sag applications

3M FireDam Spray 200

• Provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
• Resists freezing and thaws for a consistent seal in a range of conditions
• Provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307
• Water-based formula cleans up easily and saves time
• Highly elastic sealer is compression/extension tested up to ± 50% of nominal joint width without cracking

Available size: 5 gallon pails (RED colour)

3M Fire and Water Barrier Tape

• Provides fire, water and smoke protection in construction and perimeter joints
• High tack adhesive sticks to many common building materials
• Works as acoustic barrier by minimizing noise transfer
• Acts as an immediate barrier to water leakage
• Broad temperature range when applying

3M Fire Barrier Pass-Through Device

• Cable management solution for electrical, data and communication applications
• Square shape allows for stacking multiple boxes for ganging
• One-piece, square hinged metal enclosure makes installation fast and easy
• Re-enterable for high traffic areas or blank penetrations
• Intumescent material and foam smoke seals provide lasting firestop protection
• Firestop tested for up to 3 hours in accordance with ASTM E 814 (UL 1479)

3M Fire Barrier Moldable Putty Stix MP+

• Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115
• Helps reduce noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
• Noncorrosive to metal and compatible with synthetic cable jackets
• Putty provides draft and cold smoke seal
• Will not dry out or crumble for a re-enterable and repairable solution
• Low VOC, halogen-free and solvent-free formula for safe working environment with minimal odor
• Pliable and conformable design easily molds into required shapes
• Excellent adhesion and aging properties provide a long-term performance

3M Fire Barrier Moldable Putty Pads MPP+

• Pliable one-part intumescent firestop material is designed for wall openings and through penetrations
• Excellent adhesion to a wide range of construction materials
• Provides draft and cold smoke seal, helps reduce noise transfer
• Non-corrosive to metal, and compatible with synthetic cable jackets
• Firestop tested for through penetration and membrane applications for up to 4 hours in accordance with ASTM E 814 (UL 1479)
• Applied by hand, with no mixing or tools

3M Fire Barrier Plank PK39

• Pre-formed foam 1 meter (approximately 39 inches) foam plank block maintains tight firestop seal to prevent fire, smoke and toxic gas transmission
• Block is paintable with primer
• Firestop tested in accordance with ASTM E 814/UL 1479
• Fits medium to large openings in wall and floor through-penetrations
• Installation requires no special tools
• Can be sealed with 3M™ Fire Barrier Rated Foam FIP 1-Step and other 3M™ fire barrier sealants (sold separately)
• No cure time means faster completion
• Can be repaired and reused as needed, saving time and labor

Available size: 39.37 in x 5.12 in x 2.36 in, 3pcs/case (Maroon colour)